Please select one of the options to make a booking with us

CE JetClean (Non contract basis) 9000

CE JetClean (Non contract basis) 9000-12000BTU/hr

Due to the narrow fins, it traps dirt easily preventing proper airflow through the evaporator coil thus hampering the performance of the fan coil unit.

To resolve this, we use our “GC” alkaline solution with our high-pressure water jet machine which reduces the need for harmful “chemicals” to be applied onto the aluminium fins which usually leads to corrosion of pipes and other parts causing gas leaks.
Price is inclusive of transport and GST
Service duration estimated 90 -135 mins per unit

(2 hours)
SGD 192.60

Troubleshooting (air conditioning systems)

Troubleshooting (air conditioning systems)-

We will diagnose your faulty system and provide an in-depth report with costing.
Price per unit inclusive of transport and GST.
Service duration estimated 90 -120 mins per unit

(2 hours)
SGD 85.60

CE JetChem (Non contract basis)

CE JetChem (Non contract basis)-

Due to the narrow fins on the outdoor units, it traps dirt easily preventing proper airflow through the condensing coil thus hampering the optimal performance of the compressor unit.
Service duration estimated 90 -135 mins per unit

(2 hours)
SGD 107.00

Inspection of systems

Inspection of systems-

General Inspection due to system failure with report

(1 hour)
SGD 85.60

Testing and commissioning

Testing and commissioning-

Testing of System after installation ( Under warranty)

(1 hour)

Preventative maintenance for Multi System 3

Preventative maintenance for Multi System 3-

Quarterly (4x) Preventative maintenance for three (3) fan coil and one (1) condensing unit
The scope of work:
1 Cleaning of fan coil, condenser coil, water tray and drain connection
2 Purging of all water drainage pipes.
3 Greasing of the fan motor in evaporator and condenser units.
4 Inspection of fan coil and cleaning of air filters
5 Checking of refrigeration level and refill up to 1lb if necessary.
6 Tighten all motor terminals.
7 Check starter contacts. (if any)
8 Test and calibrate overload settings. (if any)
9 Check fan and compressor mounting brackets.
10 Check refrigerant filter dryer and moisture indicators. (if any)
11 Check all electrical terminals.
12 Test and commission units.

KEY BENEFITS

  1. Achieve optimum cooling effect with lowest electrical consumption.
  2. Prolongs life span of A/C equipment.
  3. Reduced likelihood of breakdowns and its related high costs.
  4. Eliminate leakage due to choked pipes/coils.
  5. Free attendance to breakdown calls and troubleshooting during office hours throughout the contract period.
  6. 10% discount allowed on replacement or spare part.

Excluded: Spare Parts and consumable items, Chemical washing of evaporator and condensing oil, Labour and parts incurred to carry out repair works, Top up of refrigerant R22 gas (S$8.00 per lbs), R410 (S$16.00 per lbs)
Price per system inclusive of GST. Transportation waived
Service duration estimated 60 -90 mins per system.

(1 hour)
SGD 321.00

Preventative maintenance for Multi System 2

Preventative maintenance for Multi System 2-

Quarterly (4x) Preventative maintenance for Two (2) fan coil and one (1) condensing unit
The scope of work:
1 Cleaning of fan coil, condenser coil, water tray and drain connection
2 Purging of all water drainage pipes.
3 Greasing of the fan motor in evaporator and condenser units.
4 Inspection of fan coil and cleaning of air filters
5 Checking of refrigeration level and refill up to 1lb if necessary.
6 Tighten all motor terminals.
7 Check starter contacts. (if any)
8 Test and calibrate overload settings. (if any)
9 Check fan and compressor mounting brackets.
10 Check refrigerant filter dryer and moisture indicators. (if any)
11 Check all electrical terminals.
12 Test and commission units.

KEY BENEFITS

  1. Achieve optimum cooling effect with lowest electrical consumption.
  2. Prolongs life span of A/C equipment.
  3. Reduced likelihood of breakdowns and its related high costs.
  4. Eliminate leakage due to choked pipes/coils.
  5. Free attendance to breakdown calls and troubleshooting during office hours throughout the contract period.
  6. 10% discount allowed on replacement or spare part.

Excluded: Spare Parts and consumable items, Chemical washing of evaporator and condensing oil, Labour and parts incurred to carry out repair works, Top up of refrigerant R22 gas (S$8.00 per Lbs), R410 (S$16.00 per Lbs)
Price per system inclusive of GST. Transportation waived
Service duration estimated 60 -90 mins per system.

(1 hour)
SGD 256.80

System 2 Anti Bacterial Servicing

System 2 Anti Bacterial Servicing-

We ensure CE Anti Bacterial treatment for indoor fan coil units for improved air quality with leakage free operations and maintenance of outdoor unit to ensure optimal performance and maximum energy savings.
Per unit : $42.80 with GST.
Transport charges @ $32.10 with GST will be waived if total bill before GST is above $100.

(1 hour)
SGD 85.60

System 3 Anti Bacterial Servicing (3 FCU/ 1 CU)

System 3 Anti Bacterial Servicing (3 FCU/ 1 CU)-

CE Anti Bacterial treatment for indoor fan coil units (FCU) and maintenance of condensing unit (CU) to ensure optimal performance and maximum energy saving.

(2 hours)
SGD 128.40

System 4 Anti Bacterial Servicing Package (9000

System 4 Anti Bacterial Servicing Package (9000-12000BTU/hr )

Supply labour, tools and transport to carry out quarterly (4x) CE Anti Bacterial treatment for four (4) wall mounted indoor fan coil units and one (1) outdoor unit to ensure optimal performance and maximum energy saving.

(2 hours)
SGD 406.60